18 Nov Garapa Decking Coverage: Planks Per Square Metre
You must check and calculate how many boards you will need to cover the area before starting your Garapa decking project. The number of planks required depends on your outdoor entertainment space dimensions, board width, and installation gaps. Knowing your Garapa decking coverage, or how many planks are needed per square metre, can help you estimate your timber requirements and make sure you order the right quantity.
OnlineBuilding.co.za distributes high-quality Garapa decking boards in different sizes and lengths at affordable prices.
Understanding Garapa Decking Board Width and Coverage
It’s important to know the difference between the board’s width and the coverage width when you are calculating your Garapa decking requirements. The board width measures the timber plank, whereas the coverage width includes the gap between boards.
The two standard Garapa decking widths need different installation gaps:
- 19 x 90mm Garapa decking boards: You must leave a 4mm to 5mm installation gap, so each board has an approximate coverage width of 94mm to 95mm.
- 19 x 140mm Garapa decking boards: Allow an 8mm to 10mm installation gap to give each board a coverage width of approximately 148mm to 150mm.
Remember that the spacing between boards determines the number of planks required per square metre for your project. You must check the Garapa decking installation details for the recommended gaps.

How to Calculate Garapa Decking Planks Per Square Metre
The number of Garapa decking planks you need per square metre is based on their width and spacing between them. You can calculate the quantity of planks using 1,000mm divided by the coverage width of the board. The estimated quantity is:
- 19 x 90mm boards: 1,000 ÷ 94.5mm = 10.6, which rounds off to approximately 11 one-metre plank lengths per m².
- 19 x 140mm boards: 1,000 ÷ 149mm = 6.7, which rounds off to approximately 7 one-metre plank lengths per m².
Note that the estimated quantities take the installation gaps into account. But the total number of full-length planks needed will differ depending on your deck size and the board lengths available.
Allowing for Cutting and Wastage
You must remember the cutting and wastage when you are calculating the amount of Garapa decking required. Some planks may need trimming to fit your deck area, which can leave extra pieces that cannot always be reused. Also, the length of the boards you choose can also affect the final finish.
You should add around 10% to your estimated plank quantity to allow for cutting and wastage. You may need additional timber for decks with irregular shapes or detailed designs.
Worked Example: Calculating Garapa Decking for a 12m² Deck
For example, consider a deck measuring 3 x 4m, which gives you 12m² of surface area. If you are using 19 x 90mm Garapa decking boards, you can estimate the quantity needed as follows:
- Calculate the total length needed: This works out to approximately 127.2 linear metres of decking (12m² x 10.6m).
- Allow for wastage: Add approximately 12.7m to cover cutting and offcuts (127.2m x 10%).
- Work out the final quantity: You will need approximately 140 linear metres of Garapa decking boards, including wastage (127.2m + 12.7m).
The exact number of full-length boards you will need to order depends on the available lengths, deck layout, and how much leftover material can be reused.
Ready to Start Your Decking Project with Garapa timber? OnlineBuilding.co.za supplies Garapa decking boards in various lengths to accommodate your project. Make sure your deck measurements are accurate and allow for the width of each board, installation spacing, and material wastage.
CONTACT US today with any pricing enquiries or quote requests. We are here to assist!
