An elegant flat profile that greatly enhances a contemporary minimalist roof line.
Size of Tile
420 x 332 mm.
16ᴼ (22.5ᴼ for overall spans lengths exceeding 8m and up to 10m).
55ᴼ (Above maximum pitch consult Marley Roofing).
100mm for rafter lengths up to 10m.
Maximum batten centres
291mm (nominal at lock mid shuffle position).
10,8 tiles/m² (net)
Weight of Tiling
+ – 56kg/m²
Batten Size Recommended
38 x 38mm for rafters/supports not exceeding 760mm centres 38 x 50mm (batten fixed flat) for rafters/supports not exceeding 900mm centres 38 x 50mm (batten on edge) for rafters/supports not exceeding 1 000mm centres Note: Above 760mm the rafter spacing can be increased only with engineer-designed trusses and with 38 x 50mm batten of the correct grade. All structural timber must comply with S.A National Standards.
50mm Corrosion-resistant tile fixing nails.
Use broken-bond practice only! Marley Radiatnt Barrier is compulsory for pitches below 26ᴼ in all cases and Radiant barrier or Undertile Membrane is compulsory for any pitch above 26ᴼ and in all cases. Ensure that all battening is in an absolute level plane. On exposed sites and at rafter lengths exceeding 8m the tile headlap must be increased to 120mm. However, increased headlap is not as effective as a steeper pitch. Due to natural variations in the raw materials and the occasional occurrence of efflorescence on concrete products, absolute colour uniformity on the roof cannot be guaranteed with Standard Through colour tiles. All tiling and fixing to comply with SANS 10062 and 10400L code of practice.